Taizhou Guanglong Lighting Co., Ltd.
Installation and maintenance precautions of weather proof light fixture for parking
2022-11
Weather proof light fixture for parking is a lighting facility installed on the road to provide the necessary visibility for vehicles and pedestrians at night, which is beneficial to improve road capacity and traffic safety. At the same time, three-dimensional lighting modes such as garden lights and landscape lights can also enhance the effect of road decoration, beautify the city night scene, and make up for the lack of road lighting. The design of road lights must be reasonable in light distribution, and the light source has a long life and is maintenance-free for perennial use. It has the characteristics of high luminous efficiency, good color rendering, and can start to work normally in an ultra-low temperature environment.
Installation and maintenance considerations for weather proof light fixture for parking
1. When installing the weather proof light fixture for parking, determine the installation location and method of the lamps and ballasts according to the actual lighting needs of the installation site;
2. Insert the weather proof light fixture for parking light pole into the introduction hole of the installation bracket, and select the appropriate position to place the light pole in the bracket tube according to the angle required for lighting, and tighten the pressing bolt that compresses the light pole. The poles and lamps are firmly connected;
3. The weather proof light fixture for parking should be equipped with a three-core cable and connected with the three-core cable that comes with the lamp when wiring, to ensure good contact and no danger of leakage;
4. Introduce the other end of the three-core cable into the ballast cavity through the introduction device through the ballast output port, and connect the red wire, black wire (or blue wire), and yellow-green wire to the corresponding ballast. on the wiring terminal, and then tighten the compression nut to ensure that the wiring is good and not loose;
5. Close the ballast box cover and lock the buckle, and then connect the other end of the three-core cable to the 220V mains power supply as required;
6. When replacing the light bulb, first cut off the power supply of the weather proof light fixture for parking, open the lamp shell, pull out the lamp socket, separate the lamp body from the lamp head shell, unscrew the old light bulb and replace it with a new one, and put the lamp socket in which the light bulb is installed. Press the appropriate gear, push it into the lamp and screw it firmly.
Service Hotline
Add: Building 56,Huigu Science Park,Jiaojiang District,Taizhou City,Zhejiang Province
E-mail:lyw@tzglds.com
ZhenHua Packing Machinery
